OpenWrt – Blame information for rev 1

Subversion Repositories:
Rev:
Rev Author Line No. Line
1 office 1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
3  
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6  
7 #include "ar9132.dtsi"
8  
9 / {
10 compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
11 model = "TP-Link TL-WR1043ND Version 1";
12  
13 aliases {
14 led-boot = &system;
15 led-failsafe = &system;
16 led-running = &system;
17 led-upgrade = &system;
18 };
19  
20 extosc: ref {
21 compatible = "fixed-clock";
22 #clock-cells = <0>;
23 clock-frequency = <40000000>;
24 };
25  
26 keys {
27 compatible = "gpio-keys";
28  
29 button0 {
30 label = "reset";
31 linux,code = <KEY_RESTART>;
32 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
33 debounce-interval = <60>;
34 };
35  
36 button1 {
37 label = "qss";
38 linux,code = <KEY_WPS_BUTTON>;
39 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
40 debounce-interval = <60>;
41 };
42 };
43  
44 leds {
45 compatible = "gpio-leds";
46 usb {
47 label = "tp-link:green:usb";
48 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
49 trigger-sources = <&hub_port>;
50 linux,default-trigger = "usbport";
51 };
52  
53 system: system {
54 label = "tp-link:green:system";
55 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
56 linux,default-trigger = "heartbeat";
57 };
58  
59 qss {
60 label = "tp-link:green:qss";
61 gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
62 };
63  
64 wlan {
65 label = "tp-link:green:wlan";
66 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
67 linux,default-trigger = "phy0tpt";
68 };
69 };
70  
71 rtl8366rb {
72 compatible = "realtek,rtl8366rb";
73 gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
74 gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
75  
76 resets = <&rst 8>;
77 reset-names = "switch";
78 };
79 };
80  
81 &uart {
82 status = "okay";
83 };
84  
85 &pll {
86 clocks = <&extosc>;
87 };
88  
89 &usb {
90 #address-cells = <1>;
91 #size-cells = <0>;
92 status = "okay";
93  
94 hub_port: port@1 {
95 reg = <1>;
96 #trigger-source-cells = <0>;
97 };
98 };
99  
100 &usb_phy {
101 status = "okay";
102 };
103  
104 &spi {
105 status = "okay";
106 num-cs = <1>;
107  
108 flash@0 {
109 compatible = "jedec,spi-nor";
110 reg = <0>;
111 spi-max-frequency = <25000000>;
112  
113 partitions {
114 compatible = "fixed-partitions";
115 #address-cells = <1>;
116 #size-cells = <1>;
117  
118 uboot: partition@0 {
119 label = "u-boot";
120 reg = <0x000000 0x020000>;
121 read-only;
122 };
123  
124 partition@20000 {
125 compatible = "tplink,firmware";
126 label = "firmware";
127 reg = <0x020000 0x7D0000>;
128 };
129  
130 art: partition@7F0000 {
131 label = "art";
132 reg = <0x7F0000 0x010000>;
133 read-only;
134 };
135 };
136 };
137 };
138  
139 &eth0 {
140 status = "okay";
141  
142 phy-mode = "rgmii";
143 mtd-mac-address = <&uboot 0x1fc00>;
144  
145 fixed-link {
146 speed = <1000>;
147 full-duplex;
148 };
149 };
150  
151 &wmac {
152 status = "okay";
153 mtd-cal-data = <&art 0x1000>;
154 mtd-mac-address = <&uboot 0x1fc00>;
155 };