OpenWrt – Blame information for rev 3
?pathlinks?
Rev | Author | Line No. | Line |
---|---|---|---|
1 | office | 1 | /* |
2 | * TP-LINK WR1043 V4 support |
||
3 | * |
||
4 | * Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at> |
||
5 | * Copyright (C) 2016 Matthias Schiffer <mschiffer@universe-factory.net> |
||
6 | * Copyright (C) 2016 Andreas Ziegler <github@andreas-ziegler.de> |
||
7 | * Copyright (C) 2016 Ludwig Thomeczek <ledesrc@wxorx.net> |
||
8 | * Copyright (C) 2017 Tim Thorpe <tim@tfthorpe.net> |
||
9 | * |
||
10 | * Derived from: mach-dir-869-a1.c |
||
11 | * |
||
12 | * This program is free software; you can redistribute it and/or modify it |
||
13 | * under the terms of the GNU General Public License version 2 as published |
||
14 | * by the Free Software Foundation. |
||
15 | */ |
||
16 | |||
17 | |||
18 | #include <linux/gpio.h> |
||
19 | #include <linux/init.h> |
||
20 | #include <linux/pci.h> |
||
21 | #include <linux/platform_device.h> |
||
22 | #include <linux/ath9k_platform.h> |
||
23 | |||
24 | #include <asm/mach-ath79/ath79.h> |
||
25 | #include <asm/mach-ath79/irq.h> |
||
26 | #include <asm/mach-ath79/ar71xx_regs.h> |
||
27 | |||
28 | #include <linux/platform_data/phy-at803x.h> |
||
29 | #include <linux/ar8216_platform.h> |
||
30 | |||
31 | #include "common.h" |
||
32 | #include "dev-ap9x-pci.h" |
||
33 | #include "dev-eth.h" |
||
34 | #include "dev-gpio-buttons.h" |
||
35 | #include "dev-leds-gpio.h" |
||
36 | #include "dev-m25p80.h" |
||
37 | #include "dev-wmac.h" |
||
38 | #include "dev-usb.h" |
||
39 | #include "machtypes.h" |
||
40 | #include "nvram.h" |
||
41 | |||
42 | #define TL_WR1043_V4_GPIO_BTN_RESET 2 |
||
43 | #define TL_WR1043_V4_GPIO_BTN_RFKILL 5 |
||
44 | |||
45 | #define TL_WR1043_V4_GPIO_LED_WLAN 19 |
||
46 | #define TL_WR1043_V4_GPIO_LED_USB 7 |
||
47 | #define TL_WR1043_V4_GPIO_LED_WPS 1 |
||
48 | #define TL_WR1043_V4_GPIO_LED_SYSTEM 6 |
||
49 | |||
50 | #define TL_WR1043_V4_GPIO_USB_POWER 8 |
||
51 | |||
3 | office | 52 | #define TL_WR1043_V4_GPIO_LED_WAN 15 |
1 | office | 53 | #define TL_WR1043_V4_GPIO_LED_LAN1 9 |
54 | #define TL_WR1043_V4_GPIO_LED_LAN2 14 |
||
55 | #define TL_WR1043_V4_GPIO_LED_LAN3 21 |
||
56 | #define TL_WR1043_V4_GPIO_LED_LAN4 20 |
||
57 | |||
58 | #define TL_WR1043_V4_KEYS_POLL_INTERVAL 20 /* msecs */ |
||
59 | #define TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043_V4_KEYS_POLL_INTERVAL) |
||
60 | |||
61 | #define TL_WR1043_V4_MAC_LOCATION 0x1ff50008 |
||
62 | |||
63 | #define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000 |
||
64 | #define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000 |
||
65 | |||
3 | office | 66 | #define TL_WR1043N_V5_MAC_LOCATION 0x1ff00008 |
1 | office | 67 | |
68 | static struct gpio_led tl_wr1043nd_v4_leds_gpio[] __initdata = { |
||
69 | { |
||
70 | .name = "tp-link:green:wps", |
||
71 | .gpio = TL_WR1043_V4_GPIO_LED_WPS, |
||
72 | .active_low = 1, |
||
73 | }, |
||
74 | { |
||
75 | .name = "tp-link:green:system", |
||
76 | .gpio = TL_WR1043_V4_GPIO_LED_SYSTEM, |
||
77 | .active_low = 1, |
||
78 | }, |
||
79 | { |
||
80 | .name = "tp-link:green:wlan", |
||
81 | .gpio = TL_WR1043_V4_GPIO_LED_WLAN, |
||
82 | .active_low = 1, |
||
83 | }, |
||
84 | { |
||
85 | .name = "tp-link:green:usb", |
||
86 | .gpio = TL_WR1043_V4_GPIO_LED_USB, |
||
87 | .active_low = 1, |
||
88 | }, |
||
89 | { |
||
90 | .name = "tp-link:green:wan", |
||
91 | .gpio = TL_WR1043_V4_GPIO_LED_WAN, |
||
92 | .active_low = 1, |
||
93 | }, |
||
94 | { |
||
95 | .name = "tp-link:green:lan1", |
||
96 | .gpio = TL_WR1043_V4_GPIO_LED_LAN1, |
||
97 | .active_low = 1, |
||
98 | }, |
||
99 | { |
||
100 | .name = "tp-link:green:lan2", |
||
101 | .gpio = TL_WR1043_V4_GPIO_LED_LAN2, |
||
102 | .active_low = 1, |
||
103 | }, |
||
104 | { |
||
105 | .name = "tp-link:green:lan3", |
||
106 | .gpio = TL_WR1043_V4_GPIO_LED_LAN3, |
||
107 | .active_low = 1, |
||
108 | }, |
||
109 | { |
||
110 | .name = "tp-link:green:lan4", |
||
111 | .gpio = TL_WR1043_V4_GPIO_LED_LAN4, |
||
112 | .active_low = 1, |
||
113 | }, |
||
114 | }; |
||
115 | |||
116 | static struct gpio_keys_button tl_wr1043nd_v4_gpio_keys[] __initdata = { |
||
117 | { |
||
118 | .desc = "Reset button", |
||
119 | .type = EV_KEY, |
||
120 | .code = KEY_RESTART, |
||
121 | .debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL, |
||
122 | .gpio = TL_WR1043_V4_GPIO_BTN_RESET, |
||
123 | .active_low = 1, |
||
124 | }, |
||
125 | { |
||
126 | .desc = "RFKILL button", |
||
127 | .type = EV_KEY, |
||
128 | .code = KEY_RFKILL, |
||
129 | .debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL, |
||
130 | .gpio = TL_WR1043_V4_GPIO_BTN_RFKILL, |
||
131 | .active_low = 1, |
||
132 | }, |
||
133 | }; |
||
134 | |||
135 | static struct ar8327_pad_cfg tl_wr1043nd_v4_ar8327_pad0_cfg = { |
||
136 | .mode = AR8327_PAD_MAC_SGMII, |
||
137 | .sgmii_delay_en = true, |
||
138 | }; |
||
139 | |||
140 | static struct ar8327_platform_data tl_wr1043nd_v4_ar8327_data = { |
||
141 | .pad0_cfg = &tl_wr1043nd_v4_ar8327_pad0_cfg, |
||
142 | .port0_cfg = { |
||
143 | .force_link = 1, |
||
144 | .speed = AR8327_PORT_SPEED_1000, |
||
145 | .duplex = 1, |
||
146 | .txpause = 1, |
||
147 | .rxpause = 1, |
||
148 | }, |
||
149 | }; |
||
150 | |||
151 | static struct mdio_board_info tl_wr1043nd_v4_mdio0_info[] = { |
||
152 | { |
||
153 | .bus_id = "ag71xx-mdio.0", |
||
3 | office | 154 | .phy_addr = 0, |
1 | office | 155 | .platform_data = &tl_wr1043nd_v4_ar8327_data, |
156 | }, |
||
157 | }; |
||
158 | |||
159 | static void __init tl_wr1043nd_v4_setup(void) |
||
160 | { |
||
161 | u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043_V4_MAC_LOCATION); |
||
162 | u8 *eeprom = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR); |
||
163 | |||
164 | ath79_register_m25p80(NULL); |
||
165 | |||
166 | ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); |
||
167 | ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; |
||
168 | ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; |
||
169 | ath79_eth0_data.phy_mask = BIT(0); |
||
170 | |||
171 | mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info, |
||
172 | ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info)); |
||
173 | |||
174 | ath79_register_usb(); |
||
175 | ath79_register_mdio(0, 0); |
||
176 | ath79_register_eth(0); |
||
177 | |||
178 | ath79_register_wmac(eeprom + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac); |
||
179 | |||
180 | ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_v4_leds_gpio), |
||
181 | tl_wr1043nd_v4_leds_gpio); |
||
182 | |||
183 | ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL, |
||
184 | ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys), |
||
185 | tl_wr1043nd_v4_gpio_keys); |
||
186 | |||
187 | gpio_request_one(TL_WR1043_V4_GPIO_USB_POWER, |
||
188 | GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, |
||
189 | "USB power"); |
||
190 | } |
||
191 | |||
192 | MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V4, "TL-WR1043ND-v4", |
||
193 | "TP-LINK TL-WR1043ND v4", tl_wr1043nd_v4_setup); |
||
194 | |||
195 | static struct gpio_led tl_wr1043n_v5_leds_gpio[] __initdata = { |
||
196 | { |
||
197 | .name = "tp-link:green:wps", |
||
198 | .gpio = TL_WR1043_V4_GPIO_LED_WPS, |
||
199 | .active_low = 1, |
||
200 | }, |
||
201 | { |
||
202 | .name = "tp-link:green:system", |
||
203 | .gpio = TL_WR1043_V4_GPIO_LED_SYSTEM, |
||
204 | .active_low = 1, |
||
205 | }, |
||
206 | { |
||
207 | .name = "tp-link:green:wlan", |
||
208 | .gpio = TL_WR1043_V4_GPIO_LED_WLAN, |
||
209 | .active_low = 1, |
||
210 | }, |
||
211 | { |
||
212 | .name = "tp-link:green:wan", |
||
213 | .gpio = TL_WR1043_V4_GPIO_LED_WAN, |
||
214 | .active_low = 1, |
||
215 | }, |
||
216 | { |
||
217 | .name = "tp-link:green:lan1", |
||
218 | .gpio = TL_WR1043_V4_GPIO_LED_LAN1, |
||
219 | .active_low = 1, |
||
220 | }, |
||
221 | { |
||
222 | .name = "tp-link:green:lan2", |
||
223 | .gpio = TL_WR1043_V4_GPIO_LED_LAN2, |
||
224 | .active_low = 1, |
||
225 | }, |
||
226 | { |
||
227 | .name = "tp-link:green:lan3", |
||
228 | .gpio = TL_WR1043_V4_GPIO_LED_LAN3, |
||
229 | .active_low = 1, |
||
230 | }, |
||
231 | { |
||
232 | .name = "tp-link:green:lan4", |
||
233 | .gpio = TL_WR1043_V4_GPIO_LED_LAN4, |
||
234 | .active_low = 1, |
||
235 | }, |
||
236 | }; |
||
237 | |||
238 | /* The 1043Nv5 is identical to the 1043NDv4, |
||
239 | * only missing the usb and small firmware layout changes */ |
||
240 | static void __init tl_wr1043nv5_setup(void) |
||
241 | { |
||
242 | u8 *art = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR); |
||
3 | office | 243 | u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043N_V5_MAC_LOCATION); |
1 | office | 244 | |
245 | ath79_register_m25p80(NULL); |
||
246 | |||
247 | ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043n_v5_leds_gpio), |
||
248 | tl_wr1043n_v5_leds_gpio); |
||
249 | ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL, |
||
250 | ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys), |
||
251 | tl_wr1043nd_v4_gpio_keys); |
||
252 | |||
253 | platform_device_register(&ath79_mdio0_device); |
||
254 | |||
255 | mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info, |
||
256 | ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info)); |
||
257 | |||
258 | ath79_register_wmac(art + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac); |
||
259 | |||
260 | ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); |
||
261 | |||
262 | /* GMAC0 is connected to an AR8337 switch */ |
||
263 | ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; |
||
264 | ath79_eth0_data.speed = SPEED_1000; |
||
265 | ath79_eth0_data.duplex = DUPLEX_FULL; |
||
266 | ath79_eth0_data.phy_mask = BIT(0); |
||
267 | ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; |
||
268 | ath79_register_eth(0); |
||
269 | } |
||
270 | |||
271 | MIPS_MACHINE(ATH79_MACH_TL_WR1043N_V5, "TL-WR1043N-v5", "TP-LINK TL-WR1043N v5", |
||
272 | tl_wr1043nv5_setup); |