![[Contents]](../images/toc_d.gif)
![[Index]](../images/index_d.gif)
![[Help]](../images/help_d.gif)
![[Retrace]](../images/retrace_d.gif)
![[Browse <]](../images/prev.gif)
![[Browse >]](../images/next.gif)
#ifndef DEVICES_HARDBLOCKS_H
#define DEVICES_HARDBLOCKS_H
/*
** $VER: hardblocks.h 44.2 (20.10.1999)
** Includes Release 44.1
**
** File System identifier blocks for hard disks
**
** (C) Copyright 1988-1999 Amiga, Inc.
** (C) Copyright 1999 Joanne Dow licensed to Amiga, Inc.
** All Rights Reserved
*/
/* Changes
** Expanded envec
** Added storage for driveinit name up to 31 letters.
** Added storage for filesysten name up to 83 letters.
**/
#ifndef EXEC_TYPES_H
#include <exec/types.h>
#endif /* EXEC_TYPES_H */
/*--------------------------------------------------------------------
*
* This file describes blocks of data that exist on a hard disk
* to describe that disk. They are not generically accessable to
* the user as they do not appear on any DOS drive. The blocks
* are tagged with a unique identifier, checksummed, and linked
* together. The root of these blocks is the RigidDiskBlock.
*
* The RigidDiskBlock must exist on the disk within the first
* RDB_LOCATION_LIMIT blocks. This inhibits the use of the zero
* cylinder in an AmigaDOS partition: although it is strictly
* possible to store the RigidDiskBlock data in the reserved
* area of a partition, this practice is discouraged since the
* reserved blocks of a partition are overwritten by "Format",
* "Install", "DiskCopy", etc. The recommended disk layout,
* then, is to use the first cylinder(s) to store all the drive
* data specified by these blocks: i.e. partition descriptions,
* file system load images, drive bad block maps, spare blocks,
* etc.
*
* Though all descriptions in this file contemplate 512 blocks
* per track this desecription works functionally with any block
* size. The LSEG blocks should make most efficient use of the
* disk block size possible, for example. While this specification
* can support 256 byte sectors that is deprecated at this time.
*
* This version adds some modest storage spaces for inserting
* the actual source filename for files installed on the RDBs
* as either DriveInit code or Filesystem code. This makes
* creating a mountfile suitable for use with the "C:Mount"
* command that can be used for manually mounting the disk if
* ever required.
*
*------------------------------------------------------------------*/
/*
* NOTE
* optional block addresses below contain $ffffffff to indicate
* a NULL address, as zero is a valid address
*/
struct RigidDiskBlock {
ULONG rdb_ID; /* 4 character identifier */
ULONG rdb_SummedLongs; /* size of this checksummed structure */
LONG rdb_ChkSum; /* block checksum (longword sum to zero) */
ULONG rdb_HostID; /* SCSI Target ID of host */
ULONG rdb_BlockBytes; /* size of disk blocks */
ULONG rdb_Flags; /* see below for defines */
/* block list heads */
ULONG rdb_BadBlockList; /* optional bad block list */
ULONG rdb_PartitionList; /* optional first partition block */
ULONG rdb_FileSysHeaderList; /* optional file system header block */
ULONG rdb_DriveInit; /* optional drive-specific init code */
/* DriveInit(lun,rdb,ior): "C" stk & d0/a0/a1 */
ULONG rdb_Reserved1[6]; /* set to $ffffffff */
/* physical drive characteristics */
ULONG rdb_Cylinders; /* number of drive cylinders */
ULONG rdb_Sectors; /* sectors per track */
ULONG rdb_Heads; /* number of drive heads */
ULONG rdb_Interleave; /* interleave */
ULONG rdb_Park; /* landing zone cylinder */
ULONG rdb_Reserved2[3];
ULONG rdb_WritePreComp; /* starting cylinder: write precompensation */
ULONG rdb_ReducedWrite; /* starting cylinder: reduced write current */
ULONG rdb_StepRate; /* drive step rate */
ULONG rdb_Reserved3[5];
/* logical drive characteristics */
ULONG rdb_RDBBlocksLo; /* low block of range reserved for hardblocks */
ULONG rdb_RDBBlocksHi; /* high block of range for these hardblocks */
ULONG rdb_LoCylinder; /* low cylinder of partitionable disk area */
ULONG rdb_HiCylinder; /* high cylinder of partitionable data area */
ULONG rdb_CylBlocks; /* number of blocks available per cylinder */
ULONG rdb_AutoParkSeconds; /* zero for no auto park */
ULONG rdb_HighRDSKBlock; /* highest block used by RDSK */
/* (not including replacement bad blocks) */
ULONG rdb_Reserved4;
/* drive identification */
char rdb_DiskVendor[8];
char rdb_DiskProduct[16];
char rdb_DiskRevision[4];
char rdb_ControllerVendor[8];
char rdb_ControllerProduct[16];
char rdb_ControllerRevision[4];
char rdb_DriveInitName[40]; // jdow: Filename for driveinit source
// jdow: as a terminated string.
};
#define IDNAME_RIGIDDISK 0x5244534B /* 'RDSK' */
#define RDB_LOCATION_LIMIT 16
#define RDBFB_LAST 0 /* no disks exist to be configured after */
#define RDBFF_LAST 0x01L /* this one on this controller */
#define RDBFB_LASTLUN 1 /* no LUNs exist to be configured greater */
#define RDBFF_LASTLUN 0x02L /* than this one at this SCSI Target ID */
#define RDBFB_LASTTID 2 /* no Target IDs exist to be configured */
#define RDBFF_LASTTID 0x04L /* greater than this one on this SCSI bus */
#define RDBFB_NORESELECT 3 /* don't bother trying to perform reselection */
#define RDBFF_NORESELECT 0x08L /* when talking to this drive */
#define RDBFB_DISKID 4 /* rdb_Disk... identification valid */
#define RDBFF_DISKID 0x10L
#define RDBFB_CTRLRID 5 /* rdb_Controller... identification valid */
#define RDBFF_CTRLRID 0x20L
/* added 7/20/89 by commodore: */
#define RDBFB_SYNCH 6 /* drive supports scsi synchronous mode */
#define RDBFF_SYNCH 0x40L /* CAN BE DANGEROUS TO USE IF IT DOESN'T! */
/*------------------------------------------------------------------*/
struct BadBlockEntry {
ULONG bbe_BadBlock; /* block number of bad block */
ULONG bbe_GoodBlock; /* block number of replacement block */
};
struct BadBlockBlock {
ULONG bbb_ID; /* 4 character identifier */
ULONG bbb_SummedLongs; /* size of this checksummed structure */
LONG bbb_ChkSum; /* block checksum (longword sum to zero) */
ULONG bbb_HostID; /* SCSI Target ID of host */
ULONG bbb_Next; /* block number of the next BadBlockBlock */
ULONG bbb_Reserved;
struct BadBlockEntry bbb_BlockPairs[61]; /* bad block entry pairs */
/* note [61] assumes 512 byte blocks */
};
#define IDNAME_BADBLOCK 0x42414442 /* 'BADB' */
/*------------------------------------------------------------------*/
struct PartitionBlock {
ULONG pb_ID; /* 4 character identifier */
ULONG pb_SummedLongs; /* size of this checksummed structure */
LONG pb_ChkSum; /* block checksum (longword sum to zero) */
ULONG pb_HostID; /* SCSI Target ID of host */
ULONG pb_Next; /* block number of the next PartitionBlock */
ULONG pb_Flags; /* see below for defines */
ULONG pb_Reserved1[2];
ULONG pb_DevFlags; /* preferred flags for OpenDevice */
UBYTE pb_DriveName[32]; /* preferred DOS device name: BSTR form */
/* (not used if this name is in use) */
ULONG pb_Reserved2[15]; /* filler to 32 longwords */
ULONG pb_Environment[20]; /* environment vector for this partition */
ULONG pb_EReserved[12]; /* reserved for future environment vector */
};
#define IDNAME_PARTITION 0x50415254 /* 'PART' */
#define PBFB_BOOTABLE 0 /* this partition is intended to be bootable */
#define PBFF_BOOTABLE 1L /* (expected directories and files exist) */
#define PBFB_NOMOUNT 1 /* do not mount this partition (e.g. manually */
#define PBFF_NOMOUNT 2L /* mounted, but space reserved here) */
/*------------------------------------------------------------------*/
struct FileSysHeaderBlock {
ULONG fhb_ID; /* 4 character identifier */
ULONG fhb_SummedLongs; /* size of this checksummed structure */
LONG fhb_ChkSum; /* block checksum (longword sum to zero) */
ULONG fhb_HostID; /* SCSI Target ID of host */
ULONG fhb_Next; /* block number of next FileSysHeaderBlock */
ULONG fhb_Flags; /* see below for defines */
ULONG fhb_Reserved1[2];
ULONG fhb_DosType; /* file system description: match this with */
/* partition environment's DE_DOSTYPE entry */
ULONG fhb_Version; /* release version of this code */
ULONG fhb_PatchFlags; /* bits set for those of the following that */
/* need to be substituted into a standard */
/* device node for this file system: e.g. */
/* 0x180 to substitute SegList & GlobalVec */
ULONG fhb_Type; /* device node type: zero */
ULONG fhb_Task; /* standard dos "task" field: zero */
ULONG fhb_Lock; /* not used for devices: zero */
ULONG fhb_Handler; /* filename to loadseg: zero placeholder */
ULONG fhb_StackSize; /* stacksize to use when starting task */
LONG fhb_Priority; /* task priority when starting task */
LONG fhb_Startup; /* startup msg: zero placeholder */
LONG fhb_SegListBlocks; /* first of linked list of LoadSegBlocks: */
/* note that this entry requires some */
/* processing before substitution */
LONG fhb_GlobalVec; /* BCPL global vector when starting task */
ULONG fhb_Reserved2[23]; /* (those reserved by PatchFlags) */
char fhb_FileSysName[84]; /* File system file name as loaded. */
};
#define IDNAME_FILESYSHEADER 0x46534844 /* 'FSHD' */
/*------------------------------------------------------------------*/
struct LoadSegBlock {
ULONG lsb_ID; /* 4 character identifier */
ULONG lsb_SummedLongs; /* size of this checksummed structure */
LONG lsb_ChkSum; /* block checksum (longword sum to zero) */
ULONG lsb_HostID; /* SCSI Target ID of host */
ULONG lsb_Next; /* block number of the next LoadSegBlock */
ULONG lsb_LoadData[123]; /* data for "loadseg" */
/* note [123] assumes 512 byte blocks */
};
#define IDNAME_LOADSEG 0x4C534547 /* 'LSEG' */
#endif /* DEVICES_HARDBLOCKS_H */