wasCSharpSQLite – Rev 1
?pathlinks?
# The author disclaims copyright to this source code. In place of
# a legal notice, here is a blessing:
#
# May you do good and not evil.
# May you find forgiveness for yourself and forgive others.
# May you share freely, never taking more than you give.
#
#***********************************************************************
#
# Tests to make sure that value returned by last_insert_rowid() (LIRID)
# is updated properly, especially inside triggers
#
# Note 1: insert into table is now the only statement which changes LIRID
# Note 2: upon entry into before or instead of triggers,
# LIRID is unchanged (rather than -1)
# Note 3: LIRID is changed within the context of a trigger,
# but is restored once the trigger exits
# Note 4: LIRID is not changed by an insert into a view (since everything
# is done within instead of trigger context)
#
set testdir [file dirname $argv0]
source $testdir/tester.tcl
# ----------------------------------------------------------------------------
# 1.x - basic tests (no triggers)
# LIRID changed properly after an insert into a table
do_test lastinsert-1.1 {
catchsql {
create table t1 (k integer primary key);
insert into t1 values (1);
insert into t1 values (NULL);
insert into t1 values (NULL);
select last_insert_rowid();
}
} {0 3}
# LIRID unchanged after an update on a table
do_test lastinsert-1.2 {
catchsql {
update t1 set k=4 where k=2;
select last_insert_rowid();
}
} {0 3}
# LIRID unchanged after a delete from a table
do_test lastinsert-1.3 {
catchsql {
delete from t1 where k=4;
select last_insert_rowid();
}
} {0 3}
# LIRID unchanged after create table/view statements
do_test lastinsert-1.4.1 {
catchsql {
create table t2 (k integer primary key, val1, val2, val3);
select last_insert_rowid();
}
} {0 3}
ifcapable view {
do_test lastinsert-1.4.2 {
catchsql {
create view v as select * from t1;
select last_insert_rowid();
}
} {0 3}
} ;# ifcapable view
# All remaining tests involve triggers. Skip them if triggers are not
# supported in this build.
#
ifcapable {!trigger} {
finish_test
return
}
# ----------------------------------------------------------------------------
# 2.x - tests with after insert trigger
# LIRID changed properly after an insert into table containing an after trigger
do_test lastinsert-2.1 {
catchsql {
delete from t2;
create trigger r1 after insert on t1 for each row begin
insert into t2 values (NEW.k*2, last_insert_rowid(), NULL, NULL);
update t2 set k=k+10, val2=100+last_insert_rowid();
update t2 set val3=1000+last_insert_rowid();
end;
insert into t1 values (13);
select last_insert_rowid();
}
} {0 13}
# LIRID equals NEW.k upon entry into after insert trigger
do_test lastinsert-2.2 {
catchsql {
select val1 from t2;
}
} {0 13}
# LIRID changed properly by insert within context of after insert trigger
do_test lastinsert-2.3 {
catchsql {
select val2 from t2;
}
} {0 126}
# LIRID unchanged by update within context of after insert trigger
do_test lastinsert-2.4 {
catchsql {
select val3 from t2;
}
} {0 1026}
# ----------------------------------------------------------------------------
# 3.x - tests with after update trigger
# LIRID not changed after an update onto a table containing an after trigger
do_test lastinsert-3.1 {
catchsql {
delete from t2;
drop trigger r1;
create trigger r1 after update on t1 for each row begin
insert into t2 values (NEW.k*2, last_insert_rowid(), NULL, NULL);
update t2 set k=k+10, val2=100+last_insert_rowid();
update t2 set val3=1000+last_insert_rowid();
end;
update t1 set k=14 where k=3;
select last_insert_rowid();
}
} {0 13}
# LIRID unchanged upon entry into after update trigger
do_test lastinsert-3.2 {
catchsql {
select val1 from t2;
}
} {0 13}
# LIRID changed properly by insert within context of after update trigger
do_test lastinsert-3.3 {
catchsql {
select val2 from t2;
}
} {0 128}
# LIRID unchanged by update within context of after update trigger
do_test lastinsert-3.4 {
catchsql {
select val3 from t2;
}
} {0 1028}
# ----------------------------------------------------------------------------
# 4.x - tests with instead of insert trigger
# These may not be run if either views or triggers were disabled at
# compile-time
ifcapable {view && trigger} {
# LIRID not changed after an insert into view containing an instead of trigger
do_test lastinsert-4.1 {
catchsql {
delete from t2;
drop trigger r1;
create trigger r1 instead of insert on v for each row begin
insert into t2 values (NEW.k*2, last_insert_rowid(), NULL, NULL);
update t2 set k=k+10, val2=100+last_insert_rowid();
update t2 set val3=1000+last_insert_rowid();
end;
insert into v values (15);
select last_insert_rowid();
}
} {0 13}
# LIRID unchanged upon entry into instead of trigger
do_test lastinsert-4.2 {
catchsql {
select val1 from t2;
}
} {0 13}
# LIRID changed properly by insert within context of instead of trigger
do_test lastinsert-4.3 {
catchsql {
select val2 from t2;
}
} {0 130}
# LIRID unchanged by update within context of instead of trigger
do_test lastinsert-4.4 {
catchsql {
select val3 from t2;
}
} {0 1030}
} ;# ifcapable (view && trigger)
# ----------------------------------------------------------------------------
# 5.x - tests with before delete trigger
# LIRID not changed after a delete on a table containing a before trigger
do_test lastinsert-5.1 {
catchsql {
drop trigger r1; -- This was not created if views are disabled.
}
catchsql {
delete from t2;
create trigger r1 before delete on t1 for each row begin
insert into t2 values (77, last_insert_rowid(), NULL, NULL);
update t2 set k=k+10, val2=100+last_insert_rowid();
update t2 set val3=1000+last_insert_rowid();
end;
delete from t1 where k=1;
select last_insert_rowid();
}
} {0 13}
# LIRID unchanged upon entry into delete trigger
do_test lastinsert-5.2 {
catchsql {
select val1 from t2;
}
} {0 13}
# LIRID changed properly by insert within context of delete trigger
do_test lastinsert-5.3 {
catchsql {
select val2 from t2;
}
} {0 177}
# LIRID unchanged by update within context of delete trigger
do_test lastinsert-5.4 {
catchsql {
select val3 from t2;
}
} {0 1077}
# ----------------------------------------------------------------------------
# 6.x - tests with instead of update trigger
# These tests may not run if either views or triggers are disabled.
ifcapable {view && trigger} {
# LIRID not changed after an update on a view containing an instead of trigger
do_test lastinsert-6.1 {
catchsql {
delete from t2;
drop trigger r1;
create trigger r1 instead of update on v for each row begin
insert into t2 values (NEW.k*2, last_insert_rowid(), NULL, NULL);
update t2 set k=k+10, val2=100+last_insert_rowid();
update t2 set val3=1000+last_insert_rowid();
end;
update v set k=16 where k=14;
select last_insert_rowid();
}
} {0 13}
# LIRID unchanged upon entry into instead of trigger
do_test lastinsert-6.2 {
catchsql {
select val1 from t2;
}
} {0 13}
# LIRID changed properly by insert within context of instead of trigger
do_test lastinsert-6.3 {
catchsql {
select val2 from t2;
}
} {0 132}
# LIRID unchanged by update within context of instead of trigger
do_test lastinsert-6.4 {
catchsql {
select val3 from t2;
}
} {0 1032}
} ;# ifcapable (view && trigger)
# ----------------------------------------------------------------------------
# 7.x - complex tests with temporary tables and nested instead of triggers
# These do not run if views or triggers are disabled.
ifcapable {trigger && view && tempdb} {
do_test lastinsert-7.1 {
catchsql {
drop table t1; drop table t2; drop trigger r1;
create temp table t1 (k integer primary key);
create temp table t2 (k integer primary key);
create temp view v1 as select * from t1;
create temp view v2 as select * from t2;
create temp table rid (k integer primary key, rin, rout);
insert into rid values (1, NULL, NULL);
insert into rid values (2, NULL, NULL);
create temp trigger r1 instead of insert on v1 for each row begin
update rid set rin=last_insert_rowid() where k=1;
insert into t1 values (100+NEW.k);
insert into v2 values (100+last_insert_rowid());
update rid set rout=last_insert_rowid() where k=1;
end;
create temp trigger r2 instead of insert on v2 for each row begin
update rid set rin=last_insert_rowid() where k=2;
insert into t2 values (1000+NEW.k);
update rid set rout=last_insert_rowid() where k=2;
end;
insert into t1 values (77);
select last_insert_rowid();
}
} {0 77}
do_test lastinsert-7.2 {
catchsql {
insert into v1 values (5);
select last_insert_rowid();
}
} {0 77}
do_test lastinsert-7.3 {
catchsql {
select rin from rid where k=1;
}
} {0 77}
do_test lastinsert-7.4 {
catchsql {
select rout from rid where k=1;
}
} {0 105}
do_test lastinsert-7.5 {
catchsql {
select rin from rid where k=2;
}
} {0 105}
do_test lastinsert-7.6 {
catchsql {
select rout from rid where k=2;
}
} {0 1205}
do_test lastinsert-8.1 {
db close
sqlite3 db test.db
execsql {
CREATE TABLE t2(x INTEGER PRIMARY KEY, y);
CREATE TABLE t3(a, b);
CREATE TRIGGER after_t2 AFTER INSERT ON t2 BEGIN
INSERT INTO t3 VALUES(new.x, new.y);
END;
INSERT INTO t2 VALUES(5000000000, 1);
SELECT last_insert_rowid();
}
} 5000000000
do_test lastinsert-9.1 {
db eval {INSERT INTO t2 VALUES(123456789012345,0)}
db last_insert_rowid
} {123456789012345}
} ;# ifcapable (view && trigger)
finish_test